Roll Compactor Machine Manufacturer


We are one of the pioneer manufacturers of Roll compactor machine manufacturer from India, Roll Compactor is used for Dry Granulation in the Pharma Industry, wet process is time consuming and required 5- 6 machine to change form from powder to granule, Roll compactor machine is also used to increase Bulk density of the product, which can be achieved in single pass or two or three pass as per the products intial bulk density

Compaction Principle: This is a dry granulation method. The basic concept is to force fine powder into solid compact or sheet. Some of the factors controlling the compaction process are roll surface, diameter, peripheral speed, separating force or pressure capabilities, feed screw and being processed. The addition of binders to the material being processed.

Technical Specification
Model GT-RC-200/50 GT-RC 200/75 GT-RC 200/100 GT-RC 200/150 GT-RC 200/200
Output 20 to 60 Kg/Hr.* 75 to 100 Kg/Hr.* 100 to 250 Kg/Hr.* 100 to 350 Kg/Hr. 150 to 400 Kg/Hr.
Roll size Ø 200 mm x 50 mm Width Ø 200 mm x 75 mm Width Ø 200 mm x 100 mm Width Ø 200 mm. x 150 mm Width Ø 200 mm. x 200 mm Width
Roll surface (Selection depends upon material characteristics) Corrugated
Plain
Knurled
Briquetted
Corrugated
Plain
Knurled
Briquetted
Corrugated
Plain
Knurled
Briquetted
Corrugated
Plain
Knurled
Briquetted
Corrugated
Plain
Knurled
Briquetted
Roll speed (Step pulley drive) 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM
Feed screw speed (Through Mechanical Variator) 10 to 60 RPM 10 to 60 RPM 10 to 60 RPM 10 to 60 RPM 10 to 60 RPM
Roll drive Motor 5 HP/ 960 RPM/ 3 Ph. 5 HP/ 960 RPM/ 5 Ph. 7.5 HP/ 960 RPM/ 3 Ph. 10 HP/ 960 RPM / 3 Ph. 10 HP/ 960 RPM / 3 Ph.
Feed screw drive motor 3 HP / 1440 RPM/ 3 Ph. 3 HP / 1440 RPM/ 3 Ph. 3 HP / 1440 RPM/ 3 Ph. 5 HP/ 1440 RPM / 3 Ph. 5 HP/ 1440 RPM / 3 Ph.

Key Features
  • In compliance with GMP guidelines
  • All covers are designed to obtain dust-free operation
  • Feed screw is steplessly driven through variable frequency drive
  • Hard chome plated & mirror finished compacting rolls made of tools steel
  • Pre-compaction chamber guides the product to rolls without any slippage or leakage
  • Electrical interlocking between main roll drive and feed screw drive
  • Water Jacketing arrangement (optional)
  • Hydraulic Power Pack system (optional)
  • ACVF Drive for rolls (optional)